كاشف معدني باللمس معبأ بأوراق الألومنيوم
كاشف معدني باللمس معبأ بأوراق الألومنيوم
Touch-screen aluminium foil packaging metal detector. The intelligent magnetic induction processing system can automatically pass the qualified packaging of aluminium foil and other non-ferrous films; signal processing is completed by digital circuit — easy to adjust, stable and reliable. 1. Absorbs advanced technology with mirror stainless steel of 3 mm thickness; stable performance, high cost performance and exquisite appearance. 2. Upper and lower radiation coils with permanent magnetic signal processing technology — high sensitivity and high anti-interference ability.
نظرة عامةCQ-807
Touch-screen aluminium foil packaging metal detector. The intelligent magnetic induction processing system can automatically pass the qualified packaging of aluminium foil and other non-ferrous films; signal processing is completed by digital circuit — easy to adjust, stable and reliable. 1. Absorbs advanced technology with mirror stainless steel of 3 mm thickness; stable performance, high cost performance and exquisite appearance. 2. Upper and lower radiation coils with permanent magnetic signal processing technology — high sensitivity and high anti-interference ability.
التطبيقات النموذجية
المزايا الرئيسية01 / FEATURES
Sealed detection coil for stable accuracy
Automatic product learning without manual setup
24 product memories with batch report storage
Detects through aluminium foil packaging
المواصفات الفنية02 / SPECIFICATION
| ارتفاع نفق الكشف | 100 / 120 / 150 / 200 / 250 / 300 / 350 |
| حساسية الحديد غير المغناطيسي | ≥0.7 / ≥0.9 / ≥1.1 / ≥1.4 / ≥1.9 / ≥2.9 / ≥3.3 |
| مصدر الطاقة | AC 220V · 50Hz · 120W |
| سرعة النقل | 25 – 30 m/min (adjustable) |
| عرض نفق الكشف | 400 mm (W) (or customized) |
| ارتفاع نفق الكشف | 100 – 200 mm (or customized) |
| أبعاد الآلة | 1400 mm (L) × 520 mm (W) × 900 mm (H) |
| طريقة الاستبعاد | Pusher, flap, air, etc. (needs customization) |
| ملاحظة | Sensitivity measured on an empty machine; actual sensitivity is affected by the product and environment and varies with the position of metal mixing. |
Frequently Asked Questions04 / FAQ
Yes. The format range is confirmed in the quotation against your can specification, and the machine is set up for your sizes during factory acceptance testing.
CE marking and the declaration of conformity are supplied with every standard machine, together with the electrical and pneumatic schematics.
Yes. Our engineer travels to your plant, installs the machine, commissions it on your product and trains your operators and maintenance staff before handover.
معدات ذات صلةALSO CONSIDER
Need A Configuration For Your Product?
Send the can specification, fill volume and required output — our engineers reply within one working day.
